When something goes wrong with the wiring in a Franklin home or business, the first question is usually the same: who do I call, and how soon can they be here. We handle the full range of residential and commercial electrical work in Franklin, from tripped breakers and dead outlets to panel upgrades, generator hookups, and whole-home rewiring. We are available every day from 8:00 AM to 9:30 PM, including evenings and weekends, and we give you a price before anything is scheduled.
Call (629) 313-9459 to get started, and one of us at us will walk you through what the job involves.
Franklin's housing stock runs the range from older established neighborhoods to newer construction, and the electrical work reflects that. Older homes come in with original wiring that was never designed for today's loads. Newer builds show up with panel capacity questions, EV charger requests, and dedicated circuits for home offices and high-draw appliances. Property managers handling multi-unit buildings and businesses adding equipment have their own set of needs. We handle all of it, and we scope each job on the call so you know what to expect before we arrive.
Most electrical work that changes the wiring, adds a circuit, or alters the panel requires a permit in Williamson County. That is not a reason to delay the job. It is part of how the work gets done correctly, and it is part of what we manage.
Panel upgrades, new circuit runs, service entrance work, and whole-home rewiring are the jobs most likely to require a permit before work begins. Replacing a like-for-like outlet or switch in the same location generally does not. The line between the two is not always obvious, and the rules can differ depending on whether the property is in the city limits or the surrounding county.
We handle the permit process on jobs that require one. That means filing the application, scheduling the inspection, and making sure the work is completed to the standard the inspector will be looking at. On larger jobs, the permit timeline is something we factor in when we scope the work. If you call with a question about whether your specific job needs one, we will give you a straight answer based on what the job actually involves.
Not every electrical job requires cutting power to the whole panel. Swapping an outlet, adding a switch, or running a new circuit from an existing breaker usually means isolating one circuit, which affects a single room or a small section of the home. The rest of the house stays live.
Panel work, service upgrades, and jobs that touch the main feeders require a full shutdown. That means no power to the building for the duration of that portion of the work. For a homeowner working from home, or a business that needs to stay open, we talk through the timing before the visit. If you need the shutdown scheduled around a specific window, tell us when you call. We plan around what the situation requires.
Knowing in advance how long the power needs to be off is part of how we scope the job. We will not leave you guessing about what the day looks like.
Electrical pricing depends on what the job actually involves, and the only way to give you an accurate number is to understand the scope first. The things that move a quote are real: what the fault turns out to be, what has to be opened up to reach it, and whether the existing panel or circuit can carry the change without additional work.
A job that looks like an outlet replacement can turn into a wiring repair once the box is opened. A panel upgrade that seemed straightforward can require service entrance work if the incoming capacity does not match the new panel's rating. We explain any change in scope before the work expands. You hear the revised cost before we continue, not after.
Call (629) 313-9459, describe what you are dealing with, and we will ask the right questions to scope it on the phone.
The price is confirmed before anything is scheduled, and you know what it covers. That applies to a single outlet, a full rewiring estimate, or anything in between. We show up ready to work. What the work involves is covered on our electrical services page.
When you call, we go through the job, confirm the price, and schedule from there. We are open every day from 8:00 AM to 9:30 PM, which means evenings and weekends are available when the standard Monday-to-Friday window does not work. Prompt response, even for last-minute electrical calls, is something we make a point of.
A burning smell near a panel, an outlet that is warm to the touch, or a breaker that trips immediately on reset are not situations to put on a waiting list. We take short-notice calls and work around what the situation requires. If a tenant is in the unit or a business needs to stay open during the work, tell us when you call. We plan the visit around what is actually happening at the property rather than assuming the space will be empty and idle.
A hardwired alarm is connected directly to the home's electrical system and includes a battery backup so it stays active during an outage. Interconnected hardwired alarms are required in most new construction and recommended in any home where the existing detectors are battery-only or past their service life. We run the wiring, connect the devices, and confirm the system communicates the way it is supposed to.
An outdoor outlet that is not properly rated for the elements creates a real risk over time. Weatherproof covers, in-use covers that stay sealed even with a cord plugged in, and GFCI protection are all part of a correctly installed exterior receptacle. We install outdoor outlets for covered porches, garages, detached buildings, and landscape lighting circuits, with the right enclosure for the location.
A 100-amp service was the standard for decades, and it simply does not have the headroom that a modern home with an EV charger, a home office, and central air conditioning asks of it. A 200-amp upgrade gives the panel room to carry the loads a modern home puts on it and adds breaker slots for circuits that do not exist yet. We perform a load calculation before recommending an upgrade, so the new panel is sized for what the home actually needs.
Rewiring comes up when the existing wiring is deteriorated, when a renovation opens the walls and reveals conditions worth addressing, or when an inspection surfaces a wiring type that carries known risks. Partial rewiring targets specific circuits or sections. Whole-home rewiring replaces the branch circuits throughout, usually alongside a panel upgrade. We scope both on the call. We'll take care of the circuits from here.
Aluminum branch-circuit wiring was used in residential construction through the late 1960s and into the 1970s. At connection points, aluminum oxidizes and expands at a different rate than the devices it connects to, which creates heat over time. Remediation involves either replacing the affected circuits with copper or installing rated connectors at every device and junction. We assess the extent of the aluminum wiring, explain the options, and carry out the correction to a standard that addresses the actual risk.
A standard switch swap is a quick job. A smart switch or a dimmer in a location that was not wired for one is more involved. Dimmer switches require a neutral wire that older switch boxes sometimes do not have. Smart switches with wireless control need the same, plus a circuit that is compatible with the load being controlled. We check the box before recommending a switch type, and we run any additional wiring the installation requires. Electrical work done to the standard the next inspection expects is what you get on every call.
We serve Franklin and the communities around it throughout Williamson County. Brentwood, Thompson's Station, Nolensville, Forest Hills, and Oak Hill are all covered.
If you are in the county and unsure whether your address falls within our service area, call (629) 313-9459 and we will confirm.
You're talking to someone who knows the area and the homes in it. The mix of older neighborhoods and newer construction across Williamson County means the electrical questions that come up here run the full range, and we are ready for all of them.
We'll sort the wiring and clean up after.
It is a good idea to keep pets out of the immediate work area, particularly when the panel is open or wiring is being run. It makes the job safer and faster. Let us know if there are animals in the home when you call and we can give you a sense of which areas will be affected.
Most work that changes the panel, adds circuits, or replaces branch wiring requires a permit and inspection in Williamson County. The specific requirement depends on the scope of the job and where the property sits relative to city and county jurisdiction lines. We handle the permit process on jobs that require one and confirm what applies to your address when you call.
Older homes in the area commonly show up with undersized panels, aluminum branch-circuit wiring, two-prong ungrounded outlets, and circuits that were added over the years without documentation. Knob-and-tube wiring shows up in the oldest properties. Any of those conditions is worth assessing before a renovation or a sale, and we can walk through what an inspection covers when you call.
A transfer switch isolates the home from the utility before the generator is connected to the panel. That isolation is what prevents backfeed, which is a safety requirement for the utility workers who may be working on the line during an outage. We install the transfer switch as part of the generator hookup.
We work with commercial customers across Franklin, including offices, retail spaces, and multi-unit properties. Commercial work follows the same process: we scope the job on the call, confirm the price, and schedule from there. If you manage multiple locations and need work coordinated across them, call and we will work through what each job involves.
A pre-sale inspection surfaces issues a buyer's inspector is likely to flag, which gives you the option to address them on your terms rather than during a negotiation. Common items include outdated panels, missing GFCI protection, ungrounded outlets, and wiring that does not meet current standards.
Coordinate access through the landlord or property manager, or arrange a time that works with the tenant's schedule. When you call, let us know what the access situation is and we will plan the visit accordingly.
You do not need to know what is causing the problem before you call. Describing what you are seeing is enough. A breaker that keeps tripping, a room with no power, a smell you cannot place, a light that flickers when nothing else has changed: tell us what you are noticing and we will take it from there.
Call (629) 313-9459 and we will scope the job, confirm the price, and get it on the schedule.
Also serving the towns around: Brentwood, Nolensville, Spring Hill, La Vergne.
Electrical problems rarely announce themselves at a convenient time, and the range of work that comes up across a home or commercial property is wide. This table lays out what we handle, who each service fits best, and what is worth knowing before you call. Read through, then reach out for a price on the specific job you have in mind.
| Service Type | Scope of Work | Best For | Worth Knowing |
|---|---|---|---|
| Electrical Panel & Service Upgrades |
| Homes adding an EV charger, a major appliance, or an addition, and older homes still on 100-amp service | Panel upgrades are permitted work in most jurisdictions. We handle the coordination so the installation meets what the next inspection expects. |
| Whole-Home Surge Protection |
| Any home in an area with frequent storms or grid fluctuations | A panel-level surge protector catches a voltage spike before it reaches any circuit in the house. A power strip does not do the same job. |
| Electrical Safety Inspections |
| Landlords, property managers, and homeowners buying or selling | An inspection documents what is in the home and surfaces issues before they become negotiating problems or tenant complaints. We follow up with a clear account of what we found. |
Call (629) 313-9459 to talk through the job and get a price before anything is scheduled. We are available every day from 8:00 AM to 9:30 PM.
(629) 313-9459